Tag Archives: Ignis

If your Suzuki Ignis has a humming noise at high speed, it can be distracting and, depending on the cause, dangerous. We’ve outlined the most common reasons why a humming noise in your car gets louder with speed. We’ve also provided an audio sample of each issue to help determine …

If your Suzuki Ignis’s AC system is not working, it can be uncomfortable and downright dangerous on a hot day. There are A LOT of issues that can cause your car’s air conditioner to fail. This article is broken down into these three sections to help save you time repairing …

Dash lights flickering and failure to start is a very common issue that can happen to the Suzuki Ignis. While your first impulse may be to think that there is something wrong with your car’s starter (and it is possible), it’s usually caused by an issue with the battery or …

P0152 is a common OBDII code that occurs in many vehicles, including the Suzuki Ignis. It indicates that the bank 2 sensor 1 O2 sensor is reporting a voltage level that is higher than its normal operating range. P0152 Definition: O2 Sensor – High Voltage – B2S1 O2 Sensor Oxygen sensors …

Daytime running lights (or DRL) are specialized lights that come on when your Suzuki Ignis’s regular headlights are turned off. Their purpose is to make it easier for other drivers to see you, theoretically decreasing the odds of getting into an accident. If your Ignis’s DRL warning light is on, …

P2271 is a generic DTC trouble code that can affect the Suzuki Ignis. It indicates that the oxygen sensor located on bank 1 in the second position is continuously sending voltage with a value that is too rich. There are oxygen sensors on both sides of the catalytic converter. The …

P0116 indicates that your Suzuki Ignis’s engine coolant temperature sensor is sending a signal to the PCM (powertrain control module) that is outside of its normal operating range (in terms of voltage). While P0116 is a generic OBD2 code (it has the same definition for any car or truck), it …

P0117 is a generic OBD2 code.  It indicates that your Suzuki Ignis’s PCM (powertrain control module) has detected the signal coming from the engine coolant temp (ECT) sensor has a voltage level below its normal operating range. With the ECT sensor, as the voltage level drops, it will appear that …

P0036 is a very common O2 sensor-related trouble code. It’s generic, which means it has the same definition for the Suzuki Ignis as any other vehicle. This code is almost always caused by a bad heated oxygen sensor or wiring issue and is almost always symptom-free. P0036 should NOT be …

P0058 is a not too common and OBDII trouble code that occurs in the Suzuki Ignis. It indicates that the heated oxygen sensor (which we’ll be referring to as HO2S a lot) heater control circuit located at B2S2 is sending a signal to the PCM that is outside of its …