Ford Focus Transmission Fluid Capacity –

Ford Focus Transmission Fluid Capacity –

If you’re the owner of a Ford Focus, then you know that it’s important to keep up with the proper maintenance of your vehicle. One key component of this is making sure that you use the best Transmission fluid for your car. In this article, we will discuss what makes a good Transmission fluid and recommend some of the best options on the market. Keep reading to learn more!


Transmission-Fluid-Capacity”>2000 2001 2002 2003 2004 2005 2006 2007 Ford Focus Transmission Fluid Capacity

Transmission Fluid Capacity Fluid Type
IB5 5-speed manual Transmission 4.9 pints (2.3 liters) SL030
MTX75 5-speed manual Transmission 4 pints (1.9 liters) SL199
4F27E 4-speed automatic Transmission Total Fill 7 quarts (6.6 liters) MLV


Transmission-Fluid-Capacity”>2009 2010 2011 Ford Focus Transmission Fluid Capacity

Transmission Capacity
4-speed 4F27E Automatic 6.9 quarts (6.6L) Motorcraft MERCON LV ATF
5-speed Manual 2.0 quarts (1.9L or 4 pints)
The level must be no higher than 3/8 inch (5mm) below the fill hole.

Refer to your scheduled maintenance information for scheduled intervals for fluid checks and changes. Your Transmission does not consume fluid. However, the fluid level should be checked if the Transmission is not working properly, i.e., if the Transmission slips or shifts slowly or if you notice some sign of fluid leakage.

Automatic Transmission fluid expands when warmed. To obtain an accurate fluid check, drive the vehicle until it is warmed up (approximately 20 miles [30 km]). If your vehicle has been operated for an extended period at high speeds, in city traffic during hot weather, or pulling a trailer, the vehicle should be turned off for about 30 minutes to allow fluid to cool before checking.


Transmission-Fluid-Capacity”>2012 2013 2014 Ford Focus Transmission Fluid Capacity

Transmission Fluid Capacity Fluid Type
1.0 Ecoboost Automatic 1.9 qt (1.8 L) SL026
1.0 Ecoboost Manual 1.8 qt (1.67 L) SL026
2.0 Automatic 1.9 qt (1.8 L) MLV
2.0 Manual 1.9 qt (1.8 L) SL026

Contact an authorized dealer for fluid level checking and filling. Approximate dry fill capacity. The actual amount may vary during fluid changes.

Automatic transmissions that require MERCON LV Transmission fluid should only use MERCON LV Transmission fluid. The use of any other fluid may cause Transmission damage.


Transmission-Fluid-Capacity”>2015 2016 2017 2018 Ford Focus Transmission Fluid Capacity

Transmission Fluid Capacity Fluid Type
MTX75 5-speed Manual Transmission 0.4 gal (1.8 L) 3.8 pints SL026
MMT6 6-speed Manual Transmission 4 pints (1.7 liters) SL026
6F15 6-speed Automatic Transmission Total Fill 9.1 quarts (8.6 liters) MLV
DPS6 6-speed Automatic Transmission (2.0l engine) Total Fill 1.9 quarts (1.8 liters) SL026

Approximate dry fill capacity including Transmission fluid cooling system, actual refill capacities will vary based on vehicle application and Transmission fluid cooling system (i.e. coolers size, cooling lines. auxiliary cooler capacities).

The amount of Transmission fluid and fluid level should be set by the indication on the dipstick’s normal operating range.

We recommend that you use Motorcraft oil and fluids for your vehicle. Only use a fluid that meets Ford’s specifications. Using other fluids could result in damage not covered by the vehicle Warranty.

Ford Focus is one of the bestsellers of the American manufacturer. It gained its popularity due to the fact that the latest generations have become global models and were available in most markets. They are not aimed at any specific audience and were suitable for a large part of buyers.

Transmission-Fluid”>What Makes a Good Transmission Fluid?

There are many factors that go into making a good Transmission fluid. Some of the most important include:

  • viscosity: The lower the viscosity, the easier it is for the fluid to flow through the system. This can help improve performance and fuel economy.
  • protection against wear and tear: A good Transmission fluid will protect your car’s gears from excessive wear and tear, which can lead to costly repairs down the road.
  • thermal stability: The Transmission fluid should be able to withstand high temperatures without breaking down or becoming ineffective.
  • corrosion protection: The fluid should also provide adequate corrosion protection for all of the components in the Transmission system.

On April 10, 2018, a completely new fourth-generation debuted at a special European event. It is much more focused on the countries of the old world, received a line of compact subcompact units, an interior made in accordance with all the canons of fashion, and a completely new design. In the guise of the fourth generation, you can only catch the echoes of the past generation. It has a more massive hexagonal radiator grille with a large plastic mesh.

The headlights have also become noticeably larger and are positioned slightly higher. The front bumper itself is also more aggressive, thanks to larger air intakes and a low aerodynamic lip. The silhouette of the car is distinguished by more embossed lines thanks to embossing on the fenders and doors.

We will be happy to hear your thoughts

Leave a reply
Enable registration in settings - general
Compare items
  • Total (0)
Shopping cart